Navigation:
Installation, Configuration and Operation of Hardware > Installation and Configuration of Control Devices > Installing the SR2 Receiver > SR2 Receiver - Configuration >> Setting the Smart Receiver Clock and Erasing Memory
Setting the Smart Receiver Clock and Erasing Memory
Contents
Smart Receivers are configured using the EMSRemoteManagementTool utilities. See: IM6000 Hanwell EMS Remote Management Tool manual for more details.
•The Smart Receiver has an on-board clock used for time/date stamping data.
➢In EMS, most date time values, including data values are stored as Greenwich Mean Time (GMT); setting the clock from one of the Management Tool Utilities will automatically set the SR2 clock to GMT.
| Note: | RadioLog uses local time to store data; which is why an SR2 cannot be shared between an EMS and a RadioLog installation. |
•Ideally, you should set the clock so that the time is synchronised with the EMS Server's time.
➢If it is out of sync., you may get false Elapsed Time Alarms.