System Configuration Admin >> Sensor Groups
EMS has the capability to group Sensors of the same type together into Sensor Groups.
•Sensors in a Sensor Group can be located on different Sites.
|For example:||For a series of rooms where temperature and humidity is being measured, the Sensors measuring these parameters can be brought together into one group.|
•Once grouped, the Sensor Group can be set to show an average value for all of the Sensors in that group.
Sensor Groups are also used to control SR2 Alarm Relays, CR3 Alarm Relays, ARB Alarm Relays/Buzzers and associated MS1000 Control Interface outputs via the Local Alarms settings.
Note: A Sensor Group is only visible to the User who created it and cannot be shared with or made visible to other Users.